Height Safety Training - US 23229 and 15757 available

Falls from height contribute to a significant number of  accidents every year.  Many of these falls are as simple as falling off a ladder, significantly changing people’s working and family lives.

Under the Health and Safety at Work Act 2015 a PCBU must ensure the health and safety of  workers and that other people are not put at risk by its work.

Trainees will take a systematic approach to assessing risks associated with height work. Particularly, where reasonably practicable the  control requires the wearing of a harness in a work positioning, fall restraint or fall arrest  system.

At completion of training, trainees will be confident in assessing risks associated with working at height, selecting, wearing and use of height safety equipment.

 

  • Working-height.JPG
  • IMG 3971
  • IMG 7547
  • MG 3504
  • WH Weltec
  • Working at height

Topics Covered:

Theory

  • Working at height systems
  • Hazard management
  • Legislation
  • Fall arrest / travel restriction systems
  • Anchor points
  • Suspension trauma
  • Permit to work
  • Emergency rescue plans

Practical

  • Using working at height equipment

Training options available

Option 1

23229 only

1 day

Option 2

23229 & 15757

1.5 days

Option 3

17600, 23229 & 15757

2 days

Option 4

17600 & 15757*

1 day

Option 5

25045 & 17600

1 day

Option 6

Refresher for 17600, 23229 & 15757**

1 day

Option 7

Refresher for 17600 & 25045**

6 hours

  • * Must have already completed unit 23229
  • ** Must have previously completed the full course to be able to attend the refresher

Group Size: Maximum 10 trainees

Location: Either our training facility, your workplace or other suitable location

Duration: 1 or 2 days

Relevant NZQA Unit Standards Available (if required):

23229: Use safety harness system when working at height
15757: Use, install and disestablish temporary proprietary height safety systems when working at height
17600: Explain safe work practices for working at heights
25045: Employ height safety equipment in the workplace

Course Provisions:

If training is onsite, a site examination can be carried out by FETS prior to your training course to ensure course content is tailored for your unique working environment.

If training is to unit standard 15757 on site, access to a area at least 2m high is required so that we can complete the practical component of the training. 

Contact Us to enquire about this course or call 0800 FETS 4 U.

Book This Course Call Today 0800 338 748